Beauty Bed / Table  / Chair for the Beauty Therapist, light massage, Pedicure, Manicure and the Tattoo Artist. Adjustable back, legs, height and can swivel / lock into place.

Beauty Bed / Table / Chair / Couch Hydraulic with face hole an face hole plug. Suitable for Beauty Therapy, Tattoo Artists, light massage. Height adjustable, legs adjustable, arms rests removable if required.

Usage / Operation:-

1. Ensure back position is in place
2. Always assist your customer / client on and off the centre of the bed
3. To lower the bed put your foot on the black foot pedal and press all the way down
4. To raise the bed, pump the foot pedal ensuring that you do not pump all the way down
5. To reduce swivelling of bed, place foot underneath the black foot pump and raise
6. To enable the bed to swivel after it is lock position, press the foot pump down a little
7. To raise or lower the backrest, put hand at the back of the bed, Lower the back rest handle out of position and raise the back rest to desired position and rest back support into lock position
8. To raise or lower the legs, hold end of bed leg, raise leaver a little and lower / raise leg.

Contents / Ingredients:-

This bed is packed into two very large boxes. Base and Bed top. Includes armrests face hole plug, leg extensions and back support parts.
2. Height adjustable from 63cm to 86cm
3. Width 82cm (includes armrests). Excluding armrest is 64cm (approx.)
4. Length from 186cm to 196cm (legs extended)
5. Backrest adjustable from just below horizontal to approx 65 degrees
6. Legs end extend up to 10cm. lowered to approx 70 degrees.
7. Double the back support for extra strength and stability
8. Suitable for Beauty Therapy, light massage, pedicures, manicures, tattooing
9. Foot pump to raise, lower, lock and unlock the bed.

Assembly:-

1. Remove the base from its box and place in the desired location in your treatment room
2. Remove the plastic protection bag from the base. If desired also remove the thin plastic scratch protection film from the base
3. Remove the bed top from its box and remove protective plastic bag. If desired (most people do not) remove the protective plastic film from the bed top. Remove other plastic ties that hold poles, etc.. into place
4. Place the Bed top onto the base hydraulic lift ensuring the that top sides into the pin. Also take care to ensure that you do not damage the base
6. To attached poles to each leg, attached to leg, remove end screw / bolt from hole, slot pole into leaver hole and place end screw back in
7. Attached back support spring to base by unscrewing screw, hook plate into place and re screwing over the hook plate. Hook end of spring goes into hole between back support poles.
8. Adjust feet if required so that the base does not wobble
8. Test Assembly. Also ensure that back support is correctly assembled.

Other Details:-

1. You must check the bed before sign off from the Freight Company.
2. For tattoo artists you may wish to keep the plastic bag on the base
3. For local Auckland customers, an extra charge will apply if you wish eBeauty to assemble
4. A short bolt may also be used to attach the base more firmly to the top.
5. Please, all pedestal  beds wobble to some degree. That is why this bed is suitable for light massage.